|Place of Origin:||China|
|Minimum Order Quantity:||1|
|Packaging Details:||Plywood cases|
|Delivery Time:||45-60 days|
|Payment Terms:||L/C, T/T|
|Supply Ability:||Based on order|
|Material:||Ductile Iron GJS500-7||Standard:||EN1074-3, EN12233|
|Fuction:||Anti Water Hammer||Coating:||EPOXY|
quiet check valve,
anti water hammer check valve
Non Slam Check Valve with anti water hammer and low Head Loss function
NSCV- Non Slam Check Valve has two outstanding features: anti water hammer and low Head Loss function. It is usually used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. The faster closing function can decrease the reverse speed of water to minimize the water hammer.
·Extremely short stroke, quick closing
·Diffuser design- lowest head loss and streamline flow
·Spring hidden on back side of disc prevent clogging
·Bronze bearing-long life service
·Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec.
·High strength ductile iron body used for durability and less weight.
·Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss.
·Stainless steel spring hidden in the diffuser under protection while valve in operation.
·Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension.
·Zero leakage of rubber disc seat.
· Installation can be vertical/horizontal/inclined.
|Working Temperature||- 10C- 80C|
|Flange||AISI B16.1 Or PN16|
|Flow Media||Clean Water|
|IQC||Check call incoming parts|
|IPQC||Check the production process is qualified|
|FQC||All valves are pressure tested|
|OQC||Check the valve ourlook and packing|
DN50 - DN350
DN400 - DN600
Contact Person: admin