|Place of Origin:||China|
|Brand Name:||AFC OEM|
|Minimum Order Quantity:||1|
|Packaging Details:||Plywood cases|
|Delivery Time:||45-60 days|
|Payment Terms:||L/C, T/T|
|Supply Ability:||Based on order|
|Material:||Ductile Iron GJS500-7||Internal Parts:||SS316|
|Coating:||Fushion Bonded Epoxy||Flow Area:||Full Flow Area|
water supply valve,
wastewater air release valve
Spill Free Sewage Air Release Valve With Anti Shock Design To Prevent Water Hammer
In waste water system , additional gas will accumulate because of all kinds of gas or air to ventilate the waste water. In order to minimize the headloss, SKAR - sewage air release valve is very important to be installed for venting the air in pipeline. Air release takes place at high points, on long ascending and descending pipe sections, downstream of pumps, upstream of restrictions.
Sewage air release valve with anti-shock device can help to prevent water hammer so that can minimize headloss. It decreased the water velocity and restrict the velocity of air flow. This type of valve is generally used in long sewage water transmission pipeline where may have water hammer. If the air exhaust out the valve too quick, the waste water will comes in very fast, too. The water will prevent the float go up which caused the valve leaking.
Combination kinetic air release valve provide 3 functions:
1. Large air release -
Anti shock device to prevent fast flow and water hammer. Decrease the air exhausting velocity to prevent water hammer. Slow down water and air out with multi holes on top sealing arc
2. Small air release
When operation the air produced by the pipeline is accumulated in the upper part. Little by little it is compressed and its volume increases, pushing the liquid level downwards and allowing the air release through the small nozzle.
3. Large air intake during draining of the pipeline.
During pipeline draining, or pipe bursts, it is necessary to bring in as much air as the quantity of outflowing liquid. This is to avoid bad pressure and strong damages to the pipeline and the total system
. Without spilling.
. Drain boss at the top & bottom for cleaning.
For sewage water system.
Size range: DN 50-200MM
Pressure ratings:1.0Mpa,1.6Mp (Flange)
Working temperature: -10°-80°C.
Flow media: sewage water.
Please consult factory for PN25 and antishock device whenever there is waterhammer issue.
|Quick Selection Table|
|Water Flow Rate
|Main pipe size
|Size of SKAR
|1||Body||Ductile Iron||EN GJS500-7|
|2||Float||Stainless Steel||AISI 304/316L|
|3||Middle Part||Ductile Iron||EN GJS500-7|
|5||Hex Bolt||Stainless Steel||AISI304|
|7||Bonnet||Ductile Iron||EN GJS500-7|
|8||Cover||Ductile Iron||EN GJS500-7|
|10||Hex Bolt||Stainless Steel||Commercial/AISI304/316|
|15||Sealing Arc||Stainless Steel||AISI304/316L|
|19||Small orifice||Stainless Steel||AISI304/316L|
Contact Person: admin